Glycol Dehydration Systems
The purpose of a glycol dehydration unit is to remove water from natural gas and natural gas liquids. When produced from a reservoir, natural gas usually contains a large amount of water and is typically completely saturated or at the water dew point.
This water can cause several problems for downstream processes and equipment. At low temperatures the water can either freeze in piping or, as is more commonly the case, form hydrates with CO2 and hydrocarbons (mainly methane hydrates). Depending on composition, these hydrates can form at relatively high temperatures plugging equipment and piping. Glycol dehydration units depress the hydrate formation point of the gas through water removal.
A Gas Dehydrator works by passing a moisture absorbing liquid (ethylene glycol) downward through a contactor tower as a wet gas is passed upward through the tower. The moisture from the gas is absorbed into the liquid. The moisture rich glycol is then passed into an atmospheric heater where it is heated to a temperature high enough to boil off the collected moisture. The glycol is then pumped back to the top of the tower.
EN-FAB, Inc. Recent Posts
NIPER-580 recognized EN-FAB, Inc. as the only company to provide . . . . .
EN-FAB completes acquisition of Oman Metal Industries & Contracting LLC . . . . .
Subscribe to our Newsletter
Keep up with our latest projects by subscribing to our newsletter
CALL US NOW
Office: +1 713 225 4913
Fax: +1 713 224 7937