READ MORE
The EN-FAB. concept of a packaged Liquid Metering System and Meter Prover go far beyond mere fabrication. Our unit is a precision equipment of a company that pioneered development of measurement stations.
READ MORE
Liquid Metering System
City Gate Stations are gas measurement/pressure regulating and reducing packages. Installed outside city limits on gas pipelines, they supply gas to end users at the required consumption pressure.
READ MORE
City Gates
Verification and/or checking the accuracy of liquid meters can be done with a device known as a liquid displacement meter prover. Meter provers can be stationary or mobile, bi-directional, uni-directional, piston type and small volume type.
READ MORE
In both gas and liquid applications, pressure reduction/regulation is required. For example in a gas distribution system the gas pressure will start in the pipeline above 1,000 psig and end up at a plant or at a residence at a pressure as low as 15 inches of water column.
READ MORE
Pressure Reducing and Regulating Skids
Consisting of a densitometer, viscometer, pressure transmitter, temperature transmitter and flow meter. The leak detection system does an on-line evaluation of viscosity, density, pressure and temperature of the fluid flowing.
READ MORE
Used to prepare the fuel (gas) before use in an engine, or burner, the gas enters a scrubber or filter separator where the solids and moisture are removed.
READ MORE
Fuel Gas Conditioning Systems
The quality analyzer system takes samples proportional to flow and does an on-line evaluation of viscosity, density, pressure, temperature and water content of; the fluid flowing.
READ MORE
Quality Analyzer Systems
Gas Dehydrators work by passing moisture absorbing liquid (ethylene glycol) downward through a contactor tower as a wet gas is passed upward through the tower. Moisture from the gas is absorbed into the liquid.
READ MORE
Glycol Dehydration Systems
Slug Catchers are devices designed to handle massive amounts of liquid moving through pipelines. They are designed with the intent of creating a retention time which slows the large unexpected movements of liquid in the pipelines.
READ MORE
Slug Catchers
Located after the Pig Receiver, a filter separator removes 99% of solids of 1 micron size or larger. It also removes liquids from the gas stream. The liquid is then routed to a sump where it is stored for pick up on a regular basis.
READ MORE
Filter Separators
Surge Control Systems are piping and valve control systems which control hydraulic jumps of liquids in pipelines due to valves slamming shut on terrain effects.
The systems are unique in that they utilize valves
READ MORE
Surge Control Systems
A Pipeline Gas Blowdown System is used to quickly and safely remove gas from a blocked-in pipeline section. This system allows an operator to quickly remove the gas from a large section of pipeline for repair or maintenance
READ MORE
Pipeline Gas Blowdown System
EN-FAB In-Line Strainers are recommended for use with turbine meters as well as positive displacement meters. Our strainers are designed to meet specific requirements. Typical industry applications for these strainers include . . . .
READ MORE
Strainers
A common process in Oil & Gas is the removal of contaminants by way of a scrubber. Depending upon the specifics of the process, either a wet or dry scrubber can be used to recover valuable liquids from gas or to protect downstream rotating equipment.
READ MORE
Scrubbers
Launchers and receivers are installed on pipelines to launch and receive pipeline pigs, pipeline spheres and pipeline inspection tools. Pig launchers & pig receivers offer a safe and effective means of . . . .
READ MORE
Launchers & Receivers
EN-FAB, Inc. Recent Posts
Subscribe to our Newsletter
Keep up with our latest projects by subscribing to our newsletter
COME VISIT US
3905 Jensen Drive
Houston, Texas 77026 USA