Separators perform a vital function in the analysis of both onshore and offshore wells in providing on site decision makes critical information to evaluate well performance and facilitate efficient extraction of oil & gas. Test separators are designed to detect flow rates of oil and gas at one well, or flow line at a time.
A typical test separator is comprised of a pressurized vessel, relief valves and a multi metering system. Sample points provide access for analysis of the separated oil, gas and water components.
3 Phase Horizontal Separators
The production of each well can be accurately determined using this method (Allocation measurement).To meet process requirements, test separators are normally designed in stages and can be grouped into:
2 Phase Separators
Separate the liquid (water + oil) from the gas, measures each phase, takes a sample of the liquid phase, and then recombines the phases into a pipeline or production facility.
3 Phase Separators
Separate the oil, gas and water, measure each phase, and then recombines them into a pipeline or production facility.
3 Phase Coalescing Plate Pack Separator Delivery
The EN-FAB Well Test Separator can be skid or trailer mounted, instrumentation can be electronic, solar powered, or pneumatic using orifice plates and charts.
Portable Well Test Separator
Vessel configurations
Separators can be divided into horizontal, vertical, or spherical separators.
Separation function
Separators can also classified into primary phase, high-pressure, low-pressure, deliquilizer used to remove dispersed droplets from a bulk gas stream and degassers, designed to remove containerized gas bubbles from the bulk liquid stream.
EN-FAB, Inc. Recent Posts
Subscribe to our Newsletter
Keep up with our latest projects by subscribing to our newsletter
COME VISIT US
3905 Jensen Drive
Houston, Texas 77026 USA